A peep sight is a small ring placed in the string of the bow such that when you pull the string, the peep sight is near your eyes for you to look the target. The hole inside the ring lines up with your eyes when you pull the string and you can peep your target through it before shooting. A peep sight gives you a consistent anchoring spot to enable you to shoot your target precisely.
You can opt for a peep sight with a tube which helps you to rotate your peep sight for personal comfort but causes to lose speed of arrows. The size of a peep sight determines the precision. The smaller the size, the higher the accuracy but it has minimal light through it. When you cannot afford a second chance, you need a smaller peep sight of 1/8 or 1/16 inch of hitting the target at first go. Peep sight makes a big difference in your shooting success and is often overlooked. You need to know how to install a peep sight.
Don’t Miss To Read: Best Single Pin Bow Sight for Hunting – Top 7 Reviewed
Install a Bow Peep Sight: Step by Step Guide
The following step by step guide will help you to learn how to install a bow peep sight in your bowstring.
Step 1: Locate the Position on Bowstring
Draw your bow back and ask somebody to mark the location near your eye where you feel comfortable. Alternatively, you can mark at 6 inches above D Loop and by trial and error method, pull your bowstring to check if the height looks comfortable.
Don’t Miss To Read: The Best Bow Case – Top 10 Models Reviewed
Step 2: Place the Peep Sight
Using a bow press, release some of the tension in the string and split the strands precisely at the center of the string. If it has a two-colored string, you can easily split at the center by splitting the string by colors. Place the peep sight in the exact center of strings otherwise; it might spin when you draw the bow. You can ask your friend to rotate the peep sight to perfect the alignment.
Step 3: Verify the Peep Sight’s Position
When you install the peep, remove the bow from the bow press. Pull back your bow such that peep sight draws near your eyes and you need to be able to see through the peep sight if peep sight is installed correctly. Otherwise, you need to raise or lower your peep sight accordingly so that it is in line with your eyes to see targets through it.
Shoot about 15 to 20 arrows to check how far it is away or near your expectations.
Don’t Miss To Read: The 10 Best Bow Quiver Reviews in 2020
Step 4: Alter the Heights
When you shoot arrows using newly installed peep sight, you might need to adjust peep sight further. You need to adjust its height further so that peep sight line up with your eye and center of sight window perfectly. Never move your natural position of sight to get the correct location of peep. Instead, it is better to adjust the peep sight to a height that is best suited to your natural position.
Step 5: Rotate the Peep Sight
If the peep sight does not turn over to your desired level, you need to remove one end of the bowstring, twist again. One complete twist of 360 degrees will give you a 90-degree turn in peep sight. Depending upon the required turn, you may twist the bowstring to get the peep sight to position it correctly with the line of sight. Repeat this process till you get the accurate and desired position of a peep sight. Your D-loop should be aligned with the peep sight.
Step 6: Fix the Peep Sight by Tying It
When you have finally got a properly positioned peep sight, you need to ensure it stays there fixed. You need to tie stop knots above and below the peep tight so that it does not move when shooting. You can tie the knot by releasing some tension off the string on a bow press.
How to Fit a Peep Sight: Video Guide
Conclusion
When you want to improve your shooting skins, peep sight helps you a lot. You might have difficulty in shooting with peep sight initially but it enables you to make a consistent anchoring in the long run. When your anchoring has improved and becomes consistent, you can start shooting without a peep sight. Some did not feel the necessity of a peep sight as it blocks their anchor and the light passing through the peep sight is not good enough to view. It also slows down the speed of your shots. Using a peep sight is more of a personal requirement, which helps beginners to gain accuracy consistently and efficiently. You need a great deal of practice to enjoy its benefits.
Leave a Reply